光电二极管

Extremely low dark current (Max 5pA), minimal noise interference, capable of accurately converting weak light signals and improving detection precision;

The flat window has uniform light transmittance, suitable for scenarios with high requirements for light signal uniformity, and no additional optical correction is needed

The spherical window/optical window has light-gathering properties, which can enhance the intensity of local optical signals and is suitable for signal collection in low-light environments;

The 2pin pin design simplifies circuit connections, reduces the difficulty of device integration, and at the same time, the dark current (Typ 2pA) is extremely low, resulting in a high signal-to-noise ratio.

The 3pin pin design supports more complex circuit function expansion (such as additional signal calibration and temperature compensation pins), making it suitable for multi-functional optical detection equipment;

The flat window ensures the uniformity of optical signals. Combined with the 1.1×1.1mm photosensitive surface, it balances signal intensity and uniformity in medium light intensity scenarios.

Large photosensitive area (Φ1.5mm) increases light input, adapts to signal acquisition in low-light environments, and enhances signal strength without relying on light-gathering components;

2pin pins simplify integration, the flat window ensures uniformity of optical signals, and the dark current (Max 20pA) remains at a low level in the large photosensitive area model, balancing light input and signal accuracy

Large photosensitive area (Φ1.5mm) + spherical window combination, double enhancement of weak light signal intensity: the large photosensitive area increases light intake, and the spherical window condenses light to enhance local light density, adapting to extremely weak light environments;

Inheriting the stability of the TO18 package, signal acquisition can be achieved without complex optical systems in extremely weak light scenarios, reducing the overall cost of the equipment.

微型化设计，可嵌入便携光谱仪等空间受限设备，体积比最大型号小 80% 以上；低暗电流 + 低结电容，弱光检测精度最高（可捕捉 nW 级光信号），高频响应无延迟.

兼容 260℃<5s 无铅回流焊，适配微型设备量产。

吸收效率更高，适配中强度光信号检测，暗电流与上升时间平衡，既保证检测精度，又满足多数场景响应速度需求。

无铅回流焊兼容，可批量集成到工业级光学设备（如液相色谱检测器）。

圆形感光面适配圆形光路系统（如激光准直器、圆形探头），光路耦合效率比方形高 15%~20%；可直接替换方形型号适配圆形光学设计，无需调整电路。

宽温稳定工作，适合户外或非标准光路的光探测场景。

感光面积达 13.69mm²，弱光捕捉能力更强（尤其适合大面积均匀光场检测）；分流电阻高，漏电流小，长期监测信号稳定性优于小尺寸型号。

兼容工业级设备安装，可直接集成到标准光学仪器插槽。

感光面积达 33.64mm²，适合极低光强、大面积光信号检测（如环境微光监测）。

宽温工作范围（-20~+80℃），在高温环境下暗电流漂移小，适合工业车间等复杂环境；无铅回流焊兼容，可批量集成到大型光学分析设备。

感光面积 100mm²（6 款最大），光吸收效率高，可捕捉星空微光、远距离光通信等极微弱大面积分散光信号；大尺寸适配大型探头，无需光学聚焦即可接收宽范围光信号。

工业级 ESD 防护（1000V HBM），强电磁干扰环境（如工厂变频器旁）下稳定工作。

高精度弱光检测：低暗电流 + 低结电容，可捕捉 nW 级弱光信号.

微型化 + 快响应：感光面最小，可嵌入便携仪器等小型设备，上升时间 0.15μs，适配短距光通信反馈等高频光信号监测。

光吸收效率更高，暗电流仅高 0.4 倍，兼顾检测精度与光捕捉能力；兼容多数工业设备 PCB 板插槽，无需定制接口，可批量集成。

350~1060nm 全光谱响应，适配可见光检测（如 LED 功率）与近红外监测（如 800nm 环境光）。

800nm 峰值波长针对性优化，近红外波段（760~1060nm）适配近红外主导的检测场景；通过峰值优化弥补了普通型号近红外响应偏弱的问题。

可直接替换后者适配近红外设备，无需调整电路或光学结构。

感光面积 33.64mm²，光吸收效率高，可捕捉 μW 级极微弱大面积分散光；大尺寸仍用直插封装，后期维护插拔更换便捷，无需拆焊整板。

宽温工作范围（-20~+80℃），高温下暗电流漂移系数低，适合工业车间、户外等复杂环境。

感光面积达 100mm²，无需光学聚焦即可接收宽范围光信号，可捕捉星空微光、远距离光通信等极微弱分散光信号。

结构坚固，配合宽温与抗干扰设计，适合长期连续工作（如 24 小时环境光监测）。

The miniaturized design can be embedded in portable devices (such as handheld instruments).

Low dark current + fast response can accurately capture nW-level weak light and high-frequency light signals, and the wide temperature range is suitable for outdoor/industrial temperature difference environments.

The large spherical lens can concentrate light, with a low-light capture efficiency of over 20%. It can improve detection sensitivity without additional optical components.

Applications: Low-light ambient light monitoring, low-power laser signal reception, and auxiliary for medical low-light imaging.

A balance between size and performance, with a photosensitive area twice as large as that of the PDCT01 series, resulting in higher light absorption efficiency.

At the same time, it retains the characteristic of low dark current, making it suitable for most general detection scenarios.

Light-sensitive area: 35%. The signal is more stable during medium and high light intensity detection. Shunt resistance: Min. 3GΩ (excellent insulation, small leakage current).

Applications: Industrial optical power monitors, packaging film light transmittance detection, medium-precision luminous flux testing.

The photosensitive area is slightly larger, resulting in better uniformity when detecting large-area light fields (such as display backlights). It is compatible with the circuit design of PDCT14-001 and can be directly replaced for upgrading.

Applications: Detection of display backlight uniformity, light intensity monitoring of large-area LED modules, multi-channel optical signal collection.

The ultra-large photosensitive area can capture extremely weak, large-area scattered light (such as μW-level optical power). The TO8 packaging structure is sturdy, with strong resistance to impact and electromagnetic interference.

It is applied in night security light monitoring, Fourier transform infrared spectrometers, and overall light intensity detection in greenhouses.

It has better low-light detection accuracy, suitable for detecting extremely weak light signals at the μW level; it has a faster high-frequency response speed, capable of capturing pulsed near-infrared signals below 1MHz (such as infrared remote control coding, short-distance infrared communication feedback).

It has strong versatility in the medium and short near-infrared range, and can be adapted to multiple near-infrared detection scenarios without replacing components.

It has outstanding large-area detection capability and is suitable for scenarios requiring large-scale optical signal collection, such as "greenhouse environmental light intensity monitoring and large optical analysis equipment"; the long near-infrared range has strong pertinence and is a dedicated choice for industrial 1064nm laser power monitoring and long-distance infrared sensing.

It has higher environmental durability and can operate stably in industrial environments with high humidity (10%~90% RH) or slight dust without additional protection.

High-speed response: With a rise time of 50μs and a low junction capacitance of 300pF, it captures high-frequency near-infrared signals faster, reduces signal delay, and is suitable for high-speed optical signal detection scenarios.

Low noise: A maximum dark current of 0.9pA and a low equivalent noise power can further reduce detection noise, ensuring the accuracy of weak near-infrared light signal conversion.

High photosensitive area and adaptation to specific wavelengths: A larger photosensitive surface can receive more near-infrared light, making it suitable for scenarios requiring high light flux or detection of specific long-wavelength near-infrared rays.

High potential for photocurrent output: A larger photosensitive area combined with a light response adapted to 1064nm can output a larger photocurrent under the same light intensity, reducing the design difficulty of subsequent signal amplification circuits.

A rise time of 0.04μs is the fastest in the series, enabling precise capture of high-frequency pulsed near-infrared light signals with no signal delay.

It offers the best weak light detection accuracy, making it suitable for precision scenarios sensitive to noise; it can be embedded in space-constrained devices (such as miniature optical power meters).

The large spherical lens window can converge divergent near-infrared light, increasing the luminous flux by 30% to 50% (compared with flat windows), and is suitable for low-light environments (such as low-power laser detection, optical analysis in dim scenes).

The lens is integrated into the package, eliminating the need for an external condenser lens, simplifying circuit design, and reducing device size and cost.

One additional pin can serve as a "shield terminal" (grounded to isolate electromagnetic interference) or a "strobe terminal" (an external voltage to control the switching of devices), making it suitable for complex industrial electromagnetic scenarios (such as motors, equipment around frequency converters).

If the pin is configured as a shield terminal, it can reduce the interference of external electromagnetic radiation on the photocurrent and ensure the signal stability of optical analysis equipment.

The large photosensitive surface can receive more near-infrared light, making it suitable for high-light-intensity scenarios (such as high-power laser power monitoring).

It has stronger resistance to mechanical impact and temperature changes, and is suitable for harsh industrial environments (such as equipment monitoring in high-temperature and vibrating conditions).

The photosensitive surface size is 1.0×1.0mm, suitable for space-constrained scenarios; it has strong stability in converting high-frequency optical signals and can withstand a wide temperature range environment.

It is suitable for high-frequency optical power detection, such as monitoring of 1000nm near-infrared pulsed optical signals and cross-band optical sensing in miniaturized optical devices.

Compatible with mainstream industrial welding processes, with strong adaptability for mass production; stable detection in low-light environments (such as low-intensity ultraviolet 365nm light); anti-static interference capability meets the needs of industrial scenarios.

Suitable for optical analysis equipment, such as multi-band spectrometers (requiring simultaneous detection of ultraviolet 200nm, visible light 633nm, and near-infrared 1000nm light), and light intensity monitoring in industrial production lines (relying on anti-static and welding adaptability).

It has better linearity of photocurrent, can withstand extreme storage environments, and has strong adaptability to transportation and inventory. The transmittance of quartz optical window to ultraviolet light is 30% higher than that of ordinary glass, improving the accuracy of ultraviolet detection.

It is suitable for ambient light monitoring equipment, such as outdoor ultraviolet radiation intensity detection (relying on quartz optical window and wide temperature working range), and weak light near-infrared signal capture (relying on large photosensitive surface and high shunt resistance).

Operating temperature: -20~+80℃, suitable for consumer electronics and general industrial environments. The welding time is shorter than that of the TO series (10s), improving mass production efficiency; the number of pins is 2, the circuit connection is simple, no complex peripheral adaptation is required, and the research and development cycle is short.

It is applicable to the field of consumer electronics, such as ambient light sensors in mobile phones and tablets (relying on DIP packaging and low cost), and miniaturized optical power meters (relying on low dark current and medium and low frequency stability).

It has better low-light detection accuracy; it is compatible with DIP standard slots, making replacement convenient during later equipment maintenance and reducing maintenance costs; the maximum reverse voltage is 20V, which is 50% higher than some similar models, improving the voltage resistance of the circuit.

It is suitable for small and medium-sized optical analysis equipment, such as laboratory ultraviolet-near-infrared spectrophotometers (relying on wide-spectrum response and convenient maintenance), and light intensity consistency detection in industrial quality inspection (relying on large photosensitive surface and voltage resistance).

Highest sensitivity in low-light response; welding temperature of 260℃/5s, with strong compatibility for mass production; maximum reverse voltage of 20V, eliminating the need for additional voltage-reducing components in circuit design and simplifying peripheral circuits.

Suitable for devices with high requirements on photosensitive area, such as pulse oximeters in the medical field (relying on high sensitivity to near-infrared 1000nm) and wide-spectrum light intensity collection in large environmentaPackage Typel light monitoring stations (relying on large photosensitive area and extreme storage stability).

The module has the optimal response speed to high-frequency optical signals, minimal dark current interference in low-light environments, and higher detection accuracy; it also features better photocurrent linearity, reducing signal distortion.

Small-sized photosensitive surface + low junction capacitance, suitable for compact space detection.

Resin windows have strong cost adaptability, balancing detection accuracy and economy, making them suitable for batch and general-purpose scenarios; they have a stable noise suppression effect on medium-intensity light signals.

They are applicable to general-purpose optical detection equipment, such as regular ultraviolet light intensity monitoring in industrial production lines and basic light signal collection in small and medium-sized optical analysis equipment.

The medium-sized photosensitive surface improves light absorption efficiency, is suitable for detecting medium-intensity light signals, has a stronger ability to capture light signals, and reduces signal missed detection.

The junction capacitance and rise time are adapted to medium and low-speed light detection scenarios, without the need for complex peripheral circuit optimization, and the R&D adaptation cost is low.

Designed with the largest photosensitive surface, it has the optimal capability to capture large-area and strong light signals. It can cover a large detection area without the need for multiple chip arrays, reducing integration complexity.

Although it has relatively large dark current and junction capacitance, it is suitable for low-frequency strong light detection scenarios. It does not require high-frequency response optimization and is suitable for scenarios where the detection area requirement is higher than the response speed requirement.

The small-sized photosensitive surface is suitable for compact circuit design, and the low dark current reduces noise interference in low-light detection.

The fast rise time can capture fluctuations in high-frequency optical signals, and its comprehensive performance is suitable for high-precision low-light detection scenarios.

Enhance the response speed in the ultraviolet band. In the detection of weak ultraviolet light (such as low-power UV LEDs), the signal capture efficiency is better than that of non-optimized models of the same size.

It is suitable for conventional ultraviolet light intensity monitoring in industrial production lines (such as light intensity calibration of UV curing equipment) and conforms to the application scenario of "light power detection".

Small size + quartz window design, meeting both the needs of compact layout and deep ultraviolet detection.

It avoids the space occupation problem of large-size quartz window models and is suitable for small deep ultraviolet sensing devices.

The medium photosensitive surface balances light absorption efficiency and circuit space. The clear peak wavelength facilitates the matching of optical systems, making it suitable for scenarios with high requirements on wavelength response consistency.

It is applicable to the optical signal receiving module of small and medium-sized optical analysis equipment (such as ultraviolet spectrophotometers), matching the application direction of the document "Optical Analysis Equipment".

A large photosensitive surface improves the capture efficiency of medium-intensity light signals, enabling coverage of a relatively large detection area without the need for a multi-chip array.

It reduces the complexity of circuit integration and is suitable for medium-power light detection scenarios.

The combination of a medium-sized photosensitive surface and a quartz window not only meets the requirements of deep ultraviolet detection but also avoids the high cost of large-sized quartz windows, making it suitable for medium-power deep ultraviolet light monitoring scenarios.

It is applicable to light intensity monitoring of industrial-grade deep ultraviolet curing equipment and medium-sized water quality ultraviolet sterilization detection systems, expanding "light power detection" to the medium-power deep ultraviolet field.

Designed with the largest photosensitive surface, it can cover an ultra-large detection area without the need for multi-chip splicing. It is suitable for detecting strong light and large-area optical signals, and reduces the complexity of the optical system inside the device.

It is suitable for optical power density monitoring of large-scale ultraviolet curing equipment (such as curing of wide-format plastic parts) and industrial-grade large-area strong light detection terminals, matching high-power scenarios of "optical power detection".

The largest photosensitive surface is combined with a quartz window, which takes into account both large-area detection and deep ultraviolet response. It is suitable for special scenarios that need to meet both "large detection range" and "deep ultraviolet monitoring" simultaneously, without the need for multiple device combinations.

It is suitable for light intensity monitoring of large-scale deep ultraviolet disinfection equipment (such as ultraviolet disinfection channels in sewage plants) and light power detection of wide-format deep ultraviolet curing production lines, expanding "light power detection" to the ultra-large range deep ultraviolet field.

The small-sized photosensitive surface is suitable for compact circuit designs. The low dark current (30pA) reduces noise interference in weak light detection, and the fast rise time (0.13μs) can capture fluctuations in high-frequency optical signals.

The optical glass window has strong cost adaptability and is suitable for mass general scenarios.

The combination of small size and deep ultraviolet detection capability avoids the space occupation problem of large-sized quartz window models; the quartz window is resistant to ultraviolet aging, and the light transmittance attenuation after continuous ultraviolet irradiation is lower than that of optical glass, extending the service life of the device.

It is suitable for handheld ultraviolet sterilization effect detectors (for detecting 254nm sterilizing ultraviolet light) and small water quality ultraviolet disinfection monitoring modules, expanding "light power detection" to the deep ultraviolet field.

The medium-sized photosensitive surface balances light absorption efficiency and circuit space, making it suitable for small and medium-sized detection equipment.

Suitable for conventional ultraviolet light intensity monitoring in industrial production lines and small and medium-sized optical power meters.

The combination of a medium photosensitive surface and a quartz window is suitable for medium-power deep ultraviolet detection.

It is applicable to the light intensity monitoring of medium-power deep ultraviolet curing equipment and medium-sized water quality ultraviolet sterilization effect detectors, expanding "light power detection" to the field of medium-power deep ultraviolet.

It can meet the needs of large-area light detection without switching to the TO8 package, balancing cost and detection efficiency.

It is suitable for light signal receiving modules of laboratory-grade optical analysis equipment (such as ultraviolet spectrophotometers) and small and medium-sized large-area optical power calibration equipment.

The only model that achieves "deep ultraviolet detection + large light absorption area" under the TO5 package. It does not require the use of a larger TO8 package and is suitable for deep ultraviolet optical analysis scenarios sensitive to size.

Suitable for small deep-ultraviolet spectrophotometers and portable deep-ultraviolet optical power analyzers, expanding "optical analysis equipment" to the deep-ultraviolet field.

The TO8 packaging structure is more robust (suitable for harsh industrial environments) and can cover an ultra-large detection area without the need for multi-chip splicing, reducing integration complexity.

It is suitable for optical power density monitoring in large-scale ultraviolet curing equipment (such as wide plastic parts and PCB board curing), and industrial-grade large-area strong light detection terminals.

It features TO8 packaging for industrial environment resistance, supports deep ultraviolet detection, and has an ultra-large photosensitive surface to meet the needs of capturing large-area strong light, eliminating the need for combining multiple devices to cover complex scenarios.

It is suitable for light intensity monitoring of industrial-grade deep ultraviolet disinfection equipment (such as ultraviolet disinfection channels in sewage plants) and light power detection in wide-format deep ultraviolet curing production lines, expanding "light power detection" to the industrial-grade deep ultraviolet field.